Product Families – Bracelets

The product family shears same design space in Grasshopper. All members come from the same definition. I was able to create multiple variations moving  sliders.


The project  aims to represent the frozen surfaces.How the surface changes the shape according to level of cold.  First shape I tried to make simple and created the gradient in between five family members. Starting from first it curves slowly and also grows as a shape. The structure inside the shape, introduces the ornament of the molecule in different density. I tried to create different chemical conditions fitting the shape of the bracelet.
Bracelet shape was created in Grasshopper,connected to Mesh settings, I can control density using the sliders..All the member of the family is printed by the 3D printer.

IMG_3870 IMG_3873_2

Screen Shot 2015-05-14 at 8.45.57 PMIMG_3860_2IMG_3857_2IMG_3853 copyIMG_3855_2 copy



I printed bracelet, it’s on scale and fits very nicely.

The total printing time was three hours, but I have been washing it since last Sunday!

I also tried to think about five family member bracelets. My idea is to start with the simple one and show how the shape changes and wraps outside.

BR-Family-5 11164164_992436347458405_1643863053_n-1 11129192_992432010792172_1886739459_n

Parametric Seating Part 2


This is the contemporary city bench by Rocker Lange Architects.

I had a trouble creating same curves in Grasshopper, and then control them as I wanted.Grasshopper02

It looks that  Brep is not working but it is. I think it cuts the frames and that’s why. But it is working.

This is the sketch of mine, The idea how I wanted create in Grasshopper


Hare are some GIF animations

It’s my firs time doing it, I’m happy haw it looks, I wanted to make it different way but hope next time I’ll make that happen.

Bench01 Bench_05 Bench_04  bench03 Bench02

Salome – Bench- Parametric Seating 1

Hi Everyone, I decided to make a street Bench


I have never used Rhino before, don’t Know how to render but I did screen shots and  I’ll try to explain how I didi it.

1-I started creating CURVE shape according to shape and then LOFT

Screen Shot 2015-02-13 at 8.25.36 PM

2.Made multiple LINE to divide the shape equally and PROJECT to apply lines to object.

Screen Shot 2015-02-13 at 8.35.37 PM

3-Then I selected only the curves,  made SURFACE and EXTRUDE

Screen Shot 2015-02-13 at 8.37.36 PM     Screen Shot 2015-02-10 at 12.15.16 AMScreen Shot 2015-02-10 at 12.17.59 AMScreen Shot 2015-02-10 at 12.17.08 AMScreen Shot 2015-02-10 at 12.15.04 AM