Product Family — Container

My idea is to design a multi-function container. Usually, it can be used as a vase of dry flowers, sometimes it can be opened to contain more small things inside. The inspiration comes from the pattern of walnut and leaves, which inspires me to design a container with organic shape and idea.

q1.jpg

plot     ezgif.com-optimize

t.jpg

Revised version Capture3.jpg

The curves are designed for a container which can be opened in the middle.

For a better interpretation of the model,  I reset the part of setting in my grasshopper.  I don’t change the demand of my grasshopper too much but focus on adjusting the value of fly.

The items below are the test I made.

revised plot2.jpg

colorful 2.gif   Example : Fly via the value of m+ Diamond and distance

Example : Fly via the value of Mesh UV and distance     Colorful5.gif

Part of Final version : (See the whole thing in thread)

colorful 7 final part.gif

 

The Original Thread:

https://thread.thorntontomasetti.com/project/5cdc823d4770ae0004df290f/explore?ds=5cdc8ba34770ae0004df2917&layout=5cdc93dd4770ae0004df2aed

The Revised  Thread:

https://thread.thorntontomasetti.com/project/5cdd248f10e4d8000488f93e/data-sets

 

Project 2 – the Design Process

The idea of this kids’ boundary design is to design a boundary with the diamond shapes. The original idea is to form the boundary by crossing several diagonals lines.

扫描文稿.jpg

step.png

First version                                                                           Revised version

However, in the first version of the boundary, I finally choose Tric as the basic shape to form the whole thing.                                                              C.png

Capture2.jpg

After building the boundary, I change the shape of the panel to diamond. Also, use LOFT demand to change the shape of each piece into the curve.jn.PNG

During the process of making the boundary, I revise my design to a diamond boundary with a change of panel’s size from bottom to top.

Draft

扫描文3w.jpgFireShot Capture 028 - Start to Finish - Pavilion with Grasshopper Rhino and Lumion - YouTub_ - www.youtube.com.png

step10.jpg

Divide the rows and columns on the surface. Then dived the points on these lines. Move the points and make them cross by each. After that, connect the line of these points.

STEP2.jpg  CaS.jpg    d1.PNG             481.PNG

sdd.PNGw.PNG481s.PNG