I just finished watching the mode lab. It was very helpful and interesting, but I am not sure if I can remember all of these. I would really appreciate if we can keep learning a little bit about Rhino in class, because I think for Interior design students, it would be really helpful to both know Rhino and Grasshopper.
Category: Assignments
Product Families Arrived!
Got my 3D prints in the mail of my little sake set! I printed the tokkuri (the serving vessel) at quarter scale, but the cups are full scale (approx 2″ x 2″ x 2″).
Final Project – Privacy Screens
The final project for the Fall 2015 term is available at the link below. Students are asked to design a family of nine [9] privacy screens that all share the same design space, and to build one at full scale.
https://docs.google.com/document/d/1jV3VwfwprBduWQKrGz2ooqrVihox8Iace6ARbvH79BU/edit?usp=sharing
Product Families – Fall 2015
The first project assignment for the Fall 2015 term can be found online here:
https://docs.google.com/document/d/1OwQY2h2TUF0-tuwCdIqXD6qyrFMH6wWpzgj-TF9T4zA/edit?usp=sharing
Free Hanging, Form Found, Laser Cut – Summer 2015
The second project outline for the Summer 2015 class can be found here:
https://docs.google.com/document/d/1p6eYXuw3WeJ5wA2_wB2MpspCeJL4k3fVMN6CoRka0B0/edit?usp=sharing
Product Families Assignment – Summer 2015
The first project assignment for the Summer session, Product Families, can be found online here:
https://docs.google.com/document/d/1eR8_lSGIGumBTzSHbHbS4ZT8GNFrAm4IOZUbFnfOhJs/edit?usp=sharing
Product Families Assignment
The final assignment for the Spring 2015 term, Product Families, can be viewed at the following location:
https://docs.google.com/document/d/1mN2T_o-62gY5uGWuIuHQxA94477JJYdhtWuUx0n2NCw/edit?usp=sharing
Students are asked to design and produce a family of 3D printable products with grasshopper, and to iteratively print family members to help inform the design process.
Spring 2015 Parametric Seating assignment
Parametric Seating – Fall 2014
The first assignment for this Fall, Parametric Seating, can be found online here: https://docs.google.com/document/d/1qeK3XadqPw-hj5f2eziO5TJjKamwdhupI6EnN5RWZfA/edit?usp=sharing
Good luck everyone!
Spring 2014 Parametric Seating Assignment
The first assignment of the Spring semester is available online here. This assignment, which we’ve done a few times before in this class, asks students to model a precedent seating system in Rhino, and to extend that surface parametrically in Grasshopper.
The assignment, including parts 1 and 2 is also embedded below. Enjoy:
Parametrics 
You must be logged in to post a comment.